How to Set Up IPTV on a MAG Box

Step 1: Initial Device Setup

Connect your MAG device to your TV using an HDMI cable and to the internet using an Ethernet/LAN cable or Wi-Fi adapter. Power on the device.

Step 2: Access Main Settings

Once the device has booted up, you will see the main portal screen. Navigate to the Settings option, usually represented by a Gear icon ⚙️.

Step 3: Navigate to System Settings

Inside the Settings menu, find and select 'System Settings'. This is where you will configure your IPTV portal connection.

Step 4: Open Servers & Portals

In the System Settings, look for and select 'Servers' or 'Portals'. This is where you will enter the connection details for our service.

Step 5: Configure Portal 1

You will see fields for Portal 1 (and sometimes Portal 2). In the 'Portal 1 Name' field, enter any name you like (e.g., 'My IPTV'). Then move to the URL field.

Step 6: Enter the Portal URL

In the 'Portal 1 URL' field, enter the unique Portal URL we sent you in your confirmation email. Make sure you enter it exactly as provided, including http:// at the beginning.

Important: The Portal URL is unique to your subscription. Do not share it with others.

Step 7: Save and Reboot

After entering the portal URL, save your settings. Then restart your MAG device. You can do this by going to Settings → Reboot Device or by unplugging it and plugging it back in.

Step 8: Launch the IPTV Portal

After the reboot, the device will automatically connect to our portal and load your channels, movies, and series. You're all set to start watching!